Select your language

To create fix firmware reset for printers Samsung
SCX-3400 / SCX-3405 / SCX-3405W / SCX-3407
need to know printer series (SN)   CRUM serie   and  firmware version

This information can be found by printing the reports of the printer:
Configuration   and Supplies Information 

1. Hold the button STOP/CLEAR for about 4-5 seconds until the LED flashes once then leave.
Print configuration report which appears SERIAL NUMBER and VERSION FIRMWARE
2. Hold STOP/CLEAR button again  for approximately 15 seconds until the LED stay green, then leave.
Print Supplies Information which appears CRUM serie

If the printer NOT allows you to print the page (or the cartridge is at  0%) quickly type the following key combination to print reports in TECH MODE
+ (plus) + (plus) STOP – (minus) – (minus) STOP STOP        (displays) UC
scroll to + up AA displays  on the printer screen than           START START 

In the 2nd part (min 1:39 – 5:32) can be seen
– How simple it is to install fix firmware reset  sent by us
– Working cartridge without chip (covered with tape or taken out)
– Counters reset to 100% after each stop/ start the printer

After reset is  necessary only refill toner cartridge
Video refill, disassembly, cleaning cartridge MLT-D101
 http://www.ereset.com/refill/reincarcare-refill-cartus-mlt-d101/

Firmware version  3.xx.02.xx can not be reset remotely, only debug printer

How to order the program (fix firmware) reset ?
––––––––––––––––––––––––––––––––––

Other details:
1/3  Install printer http://www.youtube.com/watch?v=hGyasSCZn6Q
2/3  Install  Easy Printer  Manager http://www.youtube.com/watch?v=NcoP01gczb0
3/3  Install  wireless (SCX 3405W)  http://www.youtube.com/watch?v=fZq8iPngmdY
Wireless scan   (SCX 3405W) http://www.youtube.com/watch?v=1bQYNaxg5Nw
Softpedia Forum http://forum.softpedia.com/topic/906093-samsung-scx-340034053407-reincarcare-cartus-mlt-d101-toner-refill-resoftare-reset-contoare-si-altele/